This is a very good camera for small VTOLs. They are light which is a big plus when weight matters. The DVR works fantastic, the video quality is just as good as what I see from my RunCam HD 4K. I also like the fact that I can narrow the FOV which brings the image closer. I fly at 3 to 400ft above the ground and being able to have the image closer really makes for a more enjoyable flight. The menu settings are easy to use and work great. I pretty much left all the settings at factory default except for the resolution for recording, which I set to 2.5K at 50fps. The video was fantastic. I have this one mounted on the FIMI Manta and I have another on the way which I will be mounting on the HeeWing T1 Ranger. The only problem I encountered was the GPS/Compass needs to mounted as far as possible away from the camera. The camera has a lot of RF noise that will interfere with the GPS if it very close. Other than that I would highly recommend this camera.
This 4 cell LiHv is great for flying slow and for long flight times on my 6 cell drone. Even though it's not the correct cell count, the LiHv 4.35 max voltage brings it closer into range.
I am kinda new to fpv drone flying but not new to RC and this radio is by far the best I’ve used. Definitely complicated and has a lot to lean but its loaded with features and is fully customizable and way more advanced then anything Ive used before. Coming from the Spektrum platform YouTube is your friend as there is a lot to learn.
had a few issues i used they ROBO 1002 and it fit fine without they carbon. but needs they carbon to hold battery had to use a mix of screws, had issues with props rubbing they frame with carbon using AZI props solved by not pressing props all the way down. I ordered they black and yellow, Black has a better mount for they antenna to keep in place !! yellow needs something to tie down
this gift would be nicer with a genuine properly welded whoop
Hello Franz,Thank you for the information provided. Do you have a hot air soldering station? You can use it to heat the capacitor, which should allow you to reseat it into position. After that, test to see if it's functioning properly within Betaflight. If everything is working correctly, you can further secure the capacitor with non-conductive adhesive.We sincerely apologize for the inconvenience caused. We have also credited your account with $10, which you can use to purchase any products from our store. If you have any questions or need further assistance, please feel free to reach out to us. We are always here to help. Thank you, NewBeeDrone Support