Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digitalvideo due to voltage and weight limits.
HDZero Whoop Lite is here to meet these needs,HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g.
Features
Ultra-high sensitive CMOS sensor
Excellent low light performance
HDZero Nano V2 Lite Camera
HDZero Whoop Lite VTX
Removal Shielding Box
Supports Smart Audio
Under 7g in Weight
Antenna Retention
4mm Thickness
1S-3S Input
HDZERO WHOOP LITE VTX
Mounting Pattern: 25.5x25.2 M2 (soft mounting)
Dimensions: 32.4x32.5mm (29x29mm inner)
RF Output: 25mW/200mW
Smart Audio: Supported
Thickness: 4mm
Input: 1S-3S
Weight: 4.5g
HDZERO NANO V2 LITE CAMERA
Sensor: 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMOS sensor
Not much else to say except if you are building a micro drone this vtx is perfect.
f
francisco
great lightweight hd combo
easy to build, and has removable shielding around the vtx for extra weight savings
D
David Sierocki
Amazing
The picture quality is amazing
S
SunspotFPV
Mind blown!
This was my first try HD flight on my HDZero goggles. I could not believe the clarity! I legitimately had an out of body experience and thought someone was creeping on me in my backyard only to find out that it was me. I am a believer now.
M
M.
Great set up for toothpicks
The camera is surprisingly good for the size and the lightweight can't be beat in digital.
I have this is both a 1s and 2s toothpick.
Saw a negative review saying the VTX is dead on arrival, but note that the VTX won't transmit unless the camera is completely attached via the MIPI cable. The red light will come on, but you need the red and blue light together.
Good flier, handles the abuse a new flier like me has put it through
First prebuild from NBD. I swapped out the tracer RX for crossfire, initially had a no gyro flag on the AIO but was able to get it sorted with NBD support. Flying it is a good time and it’s held up well to some decent crashes. So far only thing(s) I’ve needed to replace has been a propeller and a M3x20 standoff. Took me too long to notice but the 2 aluminum pieces are for taking the O3 air unit from 25x25 mounting and making it 20x20.