CNHL Pizza Series 350mAh 3.8V 1S 75C Lipo Battery with BT2.0 (5PCS/Packs)
Specifications:
Stock Number: HV35701PZ
Capacity: 350mAh
Voltage: 3.8V / 1-Cell / 1S1P
Discharge Rate: 75C Continual / 150C Burst
Charge Rate: 5C Max
Size: 6X11X67mm
Weight: 8g/each battery
Output Connector: BT2.0
Balance Connector: JST / XH
Wire Size (AWG): 22#
Package: 5 pcs CNHL Pizza Series 350mAh 3.8V 1S 75C Lipo Battery with BT2.0
Compatible RC Models:
CNHL 1s lipo battery 350mah is designed for micro quadcopters such as the BetaFPV Beta75 Pro 2 or the Tinyhawk II. However, it is important to check the specifications and requirements of your specific drone to ensure that the BT2.0 1S battery is compatible before using it.
It has a 75c higher C-rate, provides a longer range, and higher burst.
3.8V high voltage also provides a longer running time and is more resistant to swelling and puffing.
Designed with a BT2.0 plug, which is more durable with Betafpv drones.
The tasty look makes your RC fun and attractive!
Notice:
For the RC battery, only if the voltage and the plug match, then it will fit.
Please stop charging immediately when the cell voltage has been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
To double make sure safe, please check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.
Good flier, handles the abuse a new flier like me has put it through
First prebuild from NBD. I swapped out the tracer RX for crossfire, initially had a no gyro flag on the AIO but was able to get it sorted with NBD support. Flying it is a good time and it’s held up well to some decent crashes. So far only thing(s) I’ve needed to replace has been a propeller and a M3x20 standoff. Took me too long to notice but the 2 aluminum pieces are for taking the O3 air unit from 25x25 mounting and making it 20x20.